The advantage of an electric window regulator is undeniable in comparison with manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not always easy to identify precisely the nature of the failure. In this article, we will discover how to change the electric window regulator of a Nissan Interstar Minibus . But before you start, you have to be sure you understand where the problem came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple small repair can often suffice. Whether it concerns a false contact, or simply a lack of oiling. Now that you've identified the nature of the problem, let's get back to our topic.
Replacing a window regulator for Nissan Interstar Minibus: how to do it
Replacing a window regulator is rather tedious. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether it is on a Nissan Interstar Minibus or on another vehicle, this repair is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Nissan Interstar Minibus
- Remove the entire door trim. From the handle to the mirror cover. This should be done rather gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is the longest to execute.
- Remove the window regulator seals from your Nissan Interstar Minibus. Again, it is essential to take it delicately.
- Now that you have access to the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is ever blocked.
- Take out all the fasteners that hold the glass, then take it out. It is occasionally advisable to position the window halfway up to carry out this manipulation. Obviously, you will have to be very careful when moving the glass. It is advisable to place it on a rather thick sheet.
- Remove the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is from time to time held in place by screws or rivets, it will therefore be necessary to remove them.
Installing an electric window regulator on a Nissan Interstar Minibus
- Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You should probably use the fasteners you removed.
- Replace the glass as you removed it. It will occasionally be necessary to rotate it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Replace the entire door trim.
It's done, you now have a new and functional window regulator . You will therefore have to turn on your car and test it.