The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the defect of being much more restrictive in terms of repairs. Also, it is not necessarily obvious to identify precisely the source of the failure. With this article, we will discover how to change the electric window regulator of a Nissan King Cab . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you've identified the root of the problem, let's get to the heart of the matter.
How to replace a Nissan King Cab window regulator
Replacing a window regulator is relatively time-consuming. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught in the weather. Whether it's on a Nissan King Cab or another car, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Nissan King Cab
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is quite long to perform.
- Remove the window regulator seals from your Nissan King Cab. Again, it's important to be careful.
- Now that you have access to the window regulator, remove the connectors. You will then have to remove the motor from the window regulator if it is stuck.
- Remove all of the fasteners that hold the glass, then release it. It is sometimes preferable to position the window halfway up to be able to carry out this manipulation. Naturally, great care must be taken when moving the glass. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is important to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you will need to remove them.
The installation of an electric window regulator of a Nissan King Cab
- Position the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably need to use the fasteners you have set aside.
- Replace the glass just as you took it out. It will sometimes be necessary to move it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Replace the entire door trim.
That's it, you now have a new and functional window regulator . You will have to put the ignition on and test it.