The advantage of an electric window regulator is substantial compared to manual window regulators. On the other hand, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the exact cause of the problem. With this article we will see how to change the electric window on a Nissan Maxima 3 . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is sometimes useless to change the entire window regulator, a simple small repair can often work. Whether it's a bad contact, or just a lack of lubrication. Now that you've identified the source of the concern, let's get to the heart of the matter.
Nissan Maxima 3 window regulator replacement: how to do it
Changing a window regulator is quite time consuming. Depending on your expertise on the subject, count approximately two o'clock to make sure you don't get caught up in the time. Whether for a Nissan Maxima 3 or on another vehicle, this operation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take pictures in several steps to help you fit the new window regulator.
Removing a window regulator on a Nissan Maxima 3
- Remove the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This manipulation is the longest to perform.
- Remove the window regulator seals from your Nissan Maxima 3. Once again, it is important to do this carefully.
- Now that you have access to the window regulator, remove the connectors. You will then have to remove the motor from the window regulator if it is stuck.
- Release all the fasteners that hold the glass in place, then release the latter. It is sometimes preferable to place the glass halfway up to perform this manipulation. Of course, you will have to be very careful when moving the window. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is important to remember your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.
Installing an electric window regulator on a Nissan Maxima 3
- Fit the new window regulator. Make sure that its location is similar to the damaged window regulator. You should definitely use the bindings you have put aside.
- Reposition the glass just as you took it out. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . You will therefore have to switch on and test it.