The advantage of an electric window regulator is enormous in comparison with manual mechanisms. On the other hand, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the failure. In this article we will see how to replace the electric window regulator of a Nissan Maxima . But before seeing the procedure to follow, you must be certain of knowing where the breakdown comes from. Let's be clear, it's regularly useless to change the entire window regulator, a simple repair can sometimes be enough. Whether it's a false contact, or just a lack of lubrication. Now that you've identified the source of the concern, let's get to the heart of the matter.
How to replace a Nissan Maxima window regulator
It takes a long time to change a window regulator. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught in the weather. Whether on a Nissan Maxima or on another vehicle, this repair is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take photos at different times to help you install the new window regulator.
Removing a window regulator on a Nissan Maxima
- Dismantle the entire door trim. From the mirror cover to the handle. Rather, this should be done with care using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This step is quite long to perform.
- Disassemble the window regulator seals from your Nissan Maxima. Again, it is wiser to do it carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
- Take out all the fasteners that hold the glass, then take it out. It is regularly advisable to place the window halfway up to be able to carry out this operation. Of course, great care must be taken when moving the glass. It is advisable to put it on a rather thick sheet.
- Disassemble the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly maintained by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Nissan Maxima
- Position the new window regulator. Make sure its location is similar to the damaged window regulator. You will probably have to use the bindings you have set aside.
- Replace the glass in the same way as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's good, you now have a new and working window regulator . So you need to turn on your car and test it.