The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the problem. With this article, we will discover how to replace the electric window regulator of a Nissan Silvia . But before you start, you need to be sure you understand where the failure is coming from. Let us be clear, it is regularly useless to replace the entire window regulator, a simple repair will sometimes suffice. Whether it concerns an electrical short circuit, or just a lack of oiling. Now that you've identified the nature of the dysfunction, let's get to the heart of the matter.
How to replace a Nissan Silvia window regulator
Replacing a window regulator is rather tedious. Depending on your experience on the subject, count approximately three hours to make sure you don't get caught up in time. Whether on a Nissan Silvia or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.
Removing a window regulator on a Nissan Silvia
- Remove the entire door trim. From the mirror cover to the handle. Rather, this should be done with care using a flat screwdriver. You will have to make sure to access the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Nissan Silvia. Again, it's important to be careful.
- Now that you have access to the window regulator, remove the connectors. You can then release the window lifter motor in the event that the window is blocked.
- Remove all the fasteners that hold the glass, then take it out. It is regularly more advisable to place the window halfway up to be able to carry out this operation. Obviously, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly maintained by screws or rivets, it is therefore necessary to remove them.
Installing a Nissan Silvia electric window regulator
- Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably have to use the fasteners you have set aside.
- Reposition the glass as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Replace the entire door trim.
It's done, you now have a new and working window regulator . You can therefore turn on your car and test it.