The advantage of an electric window regulator is undeniable in comparison with manual window regulators. On the other hand, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to determine precisely the origin of the failure. In this article, we will see how to change the electric window regulator of a seat altea . But before you start, you need to be sure you understand where the malfunction came from. Let's be clear, it is regularly unnecessary to replace the entire window regulator, a simple repair will often suffice. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the nature of the concern, let's get back to our topic.change-window-regulator-seat-altea

How to replace a seat altea window regulator

Replacing a window regulator is relatively time-consuming. Depending on your expertise in the field, count approximately two o'clock to make sure you don't get caught up in time. Whether on a seat altea or on another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.

Removing a window regulator on a seat altea

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This manipulation is the longest to carry out.
  • Remove the window regulator seals from your seat altea. Again, it is crucial to do it carefully.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is regularly more advisable to place the window halfway up to be able to carry out this manipulation. Of course you will have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember your position well. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held in place by screws or rivets, so you must remove them.

Installation of an electric window regulator for a seat altea

  • Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You will probably have to use the fixings that you removed.
  • Replace the glass as you removed it. It will regularly be necessary to move it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

It's good, you now have a new and functional window regulator . You will have to put the ignition on and test it.