The advantage of an electric window regulator is substantial in comparison with manual systems. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to determine precisely the nature of the problem. In this article we will see how to replace the electric window regulator of a Seat Arosa . But before you start, you need to be sure you understand where the problem is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's a false contact, or simply a lack of oil. Now that you are sure of the origin of the dysfunction, let us return to our subject.change-window-lift-Seat-Arosa

Replacing a Seat Arosa window regulator: how to do it

Replacing a window regulator is quite time consuming. Depending on your experience in the field, count approximately two o'clock to make sure you have the time you need. Whether on a Seat Arosa or on another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Seat Arosa

  • Remove all of the door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This step is quite long to perform.
  • Remove the window regulator seals from your Seat Arosa. Again, it is essential to do this carefully.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then disengage the window lifter motor if it is stuck.
  • Remove all the fasteners that hold the glass, then release it. It is sometimes preferable to position the window halfway up to carry out this manipulation. Of course we will have to be very careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to memorize your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.

Installing an electric window regulator on a Seat Arosa

  • Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly need to use the fasteners you have set aside.
  • Replace the glass as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

That's it, you now have a new and functional window regulator . So you have to switch on and test it.