The advantage of an electric window regulator is undeniable compared to manual window regulators. On the other hand, it has the defect of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. In this article, we will discover how to repair the electric window regulator of a Toyota Auris . But before you start, you have to be sure you understand where the fault is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you've identified the root of the problem, let's get to the heart of the matter.change-window-lift-Toyota-Auris

How to replace a Toyota Auris window regulator

Replacing a window regulator is quite tedious. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught up in time. Whether for a Toyota Auris or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at different times to help you mount the new window regulator.

Removing a window regulator on a Toyota Auris

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This manipulation is quite long to execute.
  • Remove the window regulator seals from your Toyota Auris. Again, it is essential to take it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the window lifter motor if it is ever blocked.
  • Take out all the fasteners that hold the glass, then release it. It is sometimes preferable to position the window halfway up to be able to carry out this operation. Obviously, you will have to be very careful when handling the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Auris

  • Present the new window regulator. Make sure that its location is identical to the previous window regulator. You will certainly need to use the fasteners you have set aside.
  • Reposition the glass in the same way as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Replace the door trim assembly.

It's done, you now have a new and working window regulator . So you will need to turn on your car and test it.