The interest of an electric window regulator is consequent in comparison with manual mechanisms. On the other hand, it has the drawback of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. In this article we will see how to change the electric window of a Toyota Fchv-4 . But before you start, you have to be sure you understand where the failure is coming from. Let's be clear, from time to time it is unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the source of the problem, let's get back to our topic.
Toyota Fchv-4 window regulator replacement: how to do it
Replacing a window regulator is relatively tedious. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in the weather. Whether for a Toyota Fchv-4 or on another car, this manipulation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Toyota Fchv-4
- Remove the entire door trim. From mirror cover to handle. This manipulation must be done relatively delicately using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
- Remove the window regulator seals from your Toyota Fchv-4. Again, it is essential to go about it with care.
- Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor if it is blocked.
- Release all of the fasteners that hold the window in place, then remove the window. From time to time it is advisable to place the window halfway up to be able to perform this manipulation. Obviously you will have to be extremely careful when handling the glass. It is advisable to put it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is essential to remember your location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is from time to time held by screws or rivets, they must therefore be removed.
The installation of an electric window of a Toyota Fchv-4
- Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably need to use the bindings you saved.
- Replace the glass as you took it out. From time to time it will be necessary to rotate it slightly so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.