The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the failure. With this article, we will discover how to change the electric window regulator of a Volkswagen 1300 . But before you start, you need to be sure you know where the problem is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes suffice. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-regulator-Volkswagen-1300

Replacing a Volkswagen 1300 window regulator: how to do it

Changing a window regulator is quite tedious. Depending on your experience in the field, count approximately three hours to make sure you have the time you need. Whether it's on a Volkswagen 1300 or another car, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Volkswagen 1300

  • Remove all of the door trim. From the mirror cover to the handle. This should be done with enough caution with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is quite long to execute.
  • Disassemble the window regulator seals from your Volkswagen 1300. Again, it's wiser to do so with care.
  • Now that you have access to the window regulator, disconnect the connectors. You must then release the window lifter motor if it is blocked.
  • Remove all the fasteners that hold the glass, then take it out. It is sometimes better to place the window halfway up to perform this operation. Of course you will have to be very careful when moving the glass. It is best to place it on a rather thick sheet.
  • Disassemble the window regulator completely. It is wiser to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so it will be necessary to remove them.

The installation of an electric window regulator of a Volkswagen 1300

  • Position the new window regulator. Make sure that its position is similar to the previous window regulator. You probably need to use the bindings you have set aside.
  • Replace the glass as you removed it. At times it will be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

That's it, you now have a new and functional window regulator . So you need to turn on your car and test it.