The interest of an electric window regulator is consequent compared to the manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the exact cause of the problem. In this article we will find out how to change the electric window regulator of a Volkswagen 1302 . But before you start, you need to be sure you understand where the failure is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair can often work. Whether it is a false contact, or simply a lack of lubrication. Now that you've identified the nature of the dysfunction, let's get back to our topic.change-window-regulator-Volkswagen-1302

Replacing a Volkswagen 1302 window regulator: how to do it

The replacement of a window regulator is quite long. Depending on your expertise on the subject, count approximately three hours to make sure you have the necessary time. Whether on a Volkswagen 1302 or on another car, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take a picture at different times to help you fit the new window regulator.

Removing a window regulator on a Volkswagen 1302

  • Remove the entire door trim. From the handle to the retro cover. This operation should be done quite delicately using a flat screwdriver. Make sure to access the window regulator at all points without being hampered. This step is quite long to complete.
  • Remove the window regulator seals from your Volkswagen 1302. Once again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then release the motor of the window regulator if the window is ever blocked.
  • Remove all the fasteners that hold the glass, then release the glass. It is sometimes more advisable to position the window halfway up to be able to perform this operation. Of course, we will have to be very careful when moving the window. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator as a whole. It is essential to memorize your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Volkswagen 1302

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You will certainly have to use the bindings you have set aside.
  • Replace the glass the same way you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . So you need to turn on your car and test it.