The advantage of an electric window regulator is undeniable compared to manual window regulators. On the other hand, it has the drawback of being much more complex in terms of repairs. Moreover, it is not necessarily easy to determine precisely the nature of the problem. With this article we will find out how to fix the electric window regulator on a Volkswagen 1303 . But before you can see what to do, you need to be sure you understand where the failure is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes work. Whether it's a false contact, or just a lack of oiling. Now that you're sure where the concern is, let's get to the heart of the matter.
Replacing a Volkswagen 1303 window regulator: how to do it
Changing a window regulator is rather tedious. Depending on your experience in the field, plan approximately three hours to make sure you have the necessary time. Whether on a Volkswagen 1303 or on another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. It is advisable to take pictures at different times to help you fit the new window regulator.
Removing a window regulator on a Volkswagen 1303
- Remove all of the door trim. From the handle to the retro cover. This manipulation should be done rather carefully with a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being hampered. This step is the longest to perform.
- Remove the window regulator seals from your Volkswagen 1303. Once again, it is important to do this carefully.
- Now that you have access to the window regulator, disconnect the connectors. You can then release the window lifter motor if it is stuck.
- Take out all the clips that hold the glass in place, then release the glass. It is sometimes advisable to position the window halfway up to perform this manipulation. Of course you will have to be very careful when moving the window. It is best to put it on a rather thick sheet.
- Remove the window regulator entirely. It is important to remember your position. You can take a picture of it if it can help you attach the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Volkswagen 1303
- Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You should probably use the fasteners that you removed.
- Replace the glass just as you removed it. At times it will be necessary to move it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Refit all of the door trim.
It's done, you now have a new and functional window regulator . So you can put the ignition on and test it.