The advantage of an electric window regulator is undeniable compared to manual window regulators. On the other hand, it has the drawback of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the problem. With this article we will see how to fix the electric window regulator on a Volkswagen 1500 . But before you start, you need to be sure you know where the fault is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will often work. Whether it concerns an electrical short circuit, or quite simply a lack of lubrication. Now that you're sure where the problem is, let's get to the heart of the matter.change-window-regulator-Volkswagen-1500

Replacing a Volkswagen 1500 window regulator: how to do it

Replacing a window regulator is rather time-consuming. Depending on your experience in the field, plan approximately three hours to make sure you don't get caught up in the time. Whether on a Volkswagen 1500 or on another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. It is advisable to take a picture at different times in order to help you reassemble the new window regulator.

Removing a window regulator on a Volkswagen 1500

  • Remove the entire door trim. From mirror cover to handle. This operation should be done rather delicately using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being hampered. This manipulation is the longest to perform.
  • Remove the window regulator gaskets from your Volkswagen 1500. Again, it is important to do this with caution.
  • Now that you have access to the window regulator, disconnect the connectors. You must then release the motor of the window regulator if it is blocked.
  • Remove all the fasteners that hold the glass in place, then remove the glass. It is sometimes advisable to position the window halfway up to perform this operation. Of course you will have to be very careful when handling the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator as a whole. It is important to remember its location well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so they will have to be removed.

The installation of an electric window regulator of a Volkswagen 1500

  • Fit the new window regulator. Make sure that its position is identical to the previous window regulator. You may need to use the fasteners you removed.
  • Reposition the glass just as you removed it. At times it will be necessary to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit the entire door trim.

It's good, you now have a new and working window regulator . So you have to put the ignition on and test it.