The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. On the other hand, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the nature of the problem. With this article we will find out how to replace the electric window regulator of a Volkswagen 411 . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's a false contact, or simply a lack of oiling. Now that you're sure what the problem is, let's get to the heart of the matter.
Replacing a Volkswagen 411 window regulator: how to do it
Replacing a window regulator is relatively tedious. Depending on your expertise in the field, plan approximately two o'clock to make sure you have the time you need. Whether on a Volkswagen 411 or on another vehicle, this repair is for experienced DIY enthusiasts. So let's look at what to do, point by point. We advise you to take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Volkswagen 411
- Remove the entire door trim. From mirror cover to handle. This manipulation must be done relatively carefully using a flat screwdriver. You must ensure that you can access the window regulator at all points without being hindered. This manipulation is quite long to perform.
- Remove the window regulator gaskets from your Volkswagen 411. Once again, it is wiser to go about it with care.
- Now that you have access to the window regulator, disconnect the connectors. You must then release the motor of the window regulator when the latter is stuck.
- Release all the fasteners that hold the glass, then release the latter. It is sometimes more advisable to position the window halfway up to be able to carry out this manipulation. Obviously you have to be extremely careful when moving the window. It is best to put it on a rather thick sheet.
- Remove the window regulator completely. It is wiser to memorize your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, they must therefore be removed.
The installation of an electric window regulator of a Volkswagen 411
- Position the new window regulator. Make sure that its position is similar to the previous window regulator. You will certainly have to use the fasteners that you have set aside.
- Replace the glass the same way you took it out. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Refit all of the door trim.
That's it, you now have a new and working window regulator . You must therefore turn on your car and test it.