The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to determine precisely the nature of the failure. Here we will see how to replace the electric window regulator of a Volkswagen Arteon . But before you start, be sure you know where the problem is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it concerns a false contact, or simply a lack of oiling. Now that you are sure of the source of the problem, let's get to the heart of the matter.change-window-regulator-Volkswagen-Arteon

How to replace a Volkswagen Arteon window regulator

Replacing a window regulator is rather tedious. Depending on your experience on the subject, count approximately two o'clock to make sure you have the time you need. Whether it's on a Volkswagen Arteon or on another car, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.

Removing a window regulator on a Volkswagen Arteon

  • Remove the entire door trim. From the handle to the mirror cover. This should be done rather gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Volkswagen Arteon. Again, it's wiser to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is stuck.
  • Release all of the fasteners that hold the glass, then take it out. It is sometimes better to place the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when handling the glass. It's best to put it on a rather thick sheet.
  • Remove the window regulator completely. It is wiser to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Volkswagen Arteon

  • Position the new window regulator. Make sure that its location is identical to the previous window regulator. You will probably have to use the fasteners you removed.
  • Reposition the glass in the same way as you removed it. At times it will be necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

It's done, you now have a new and working window regulator . So you can turn on your car and test it.