The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. In this article, we will see how to repair the electric window regulator of an Opel Omega 2 . But before you start, you need to be sure you know where the malfunction came from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair can sometimes work. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you've identified the nature of the problem, let's get back to our topic.change-window-opel-Opel-Omega-2

Replacing an Opel Omega 2 window regulator: how to do it

Changing a window regulator is relatively tedious. Depending on your expertise on the subject, count approximately two o'clock to make sure you have the time you need. Whether for an Opel Omega 2 or another car, this repair is for experienced DIY enthusiasts. So let's look at what to do, step by step. It is advisable to take photos at several stages in order to help you assemble the new window regulator.

Removing a window regulator on an Opel Omega 2

  • Remove all of the door trim. From the handle to the mirror cover. This should be done relatively gently using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being disturbed. This manipulation is quite long to execute.
  • Remove the window regulator seals from your Opel Omega 2. Again, this is essential to do so with care.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the motor from the window regulator in case it is stuck.
  • Remove all the fasteners that hold the window, then remove the window. It is sometimes better to position the window halfway up to perform this operation. Obviously you will have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so they must be removed.

Installing an electric window regulator on an Opel Omega 2

  • Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You should definitely use the fasteners you have set aside.
  • Reposition the glass in the same way as you removed it. At times it will be necessary to move it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . You will have to put the ignition on and test it.