When the clock stops lighting up, it can get annoying. So we will have to change the display bulb of the Citroen Nemo Combi. Even if the dashboard remains functional, we lack several indications in order to circulate in sufficient comfort. This action is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To carry out this operation, count approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the display bulb of the Citroen Nemo Combi
Depending on the years of production, the procedure may vary a little. It is conceivable that some covers or screws differ. This is therefore the logic to be followed in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of your Citroen Nemo Combi. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
- You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific problems.