When the clock runs out of light, it can be unpleasant. We will therefore have to replace the display bulb of this Citroen Nemo. Although the dashboard remains functional, some information is missing in order to circulate comfortably. This action is not difficult to carry out, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To perform this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Citroen-Nemo

How to change the light bulb on the Citroen Nemo display

Depending on the year of release, the methodology may vary a little. It is likely that some covers or screws are not identical. Here is the procedure to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
  • Once the facade is completely removed, you must disconnect connectors connected to the clock bulb of this Citroen Nemo. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the broken bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered specific concerns.