When the clock stops lighting up, it can get unpleasant. So you have to change the display bulb of the Citroen Picasso. Although the dashboard remains operational, it lacks a few indications to circulate comfortably. This operation is not hard to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remind you of the reverse process, especially for connectors. To perform this operation, count approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Citroen-Picasso

How to change the light bulb on the Citroen Picasso display

Depending on the years of production, the methodology may vary a little. Several covers or screws may differ. Here is the logic to follow in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you must disconnect connectors connected to the Citroen Picasso clock bulb. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension too of course.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered specific problems.