When the clock runs out of light, it can be annoying. So you have to change the display bulb of this Citroen Revolte. Even if the dashboard is still operational, it lacks some indications to drive in good conditions. This operation is not complex to perform, but requires a minimum of thoroughness. It is advisable to take pictures at certain stages to remember the reverse process, especially for the connectors. To complete this task, count roughly a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Citroen-Revolte

How to change the display bulb of the Citroen Revolte

Depending on the years of production, the procedure may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them preciously aside.
  • Once the facade is completely removed, you must disconnect connectors connected to the clock bulb of your Citroen Revolte. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage as well obviously.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular problems.