When the clock stops lighting up, it can be annoying. It will therefore have to change the display bulb of the Citroen Saxo. Although the dashboard remains functional, we lack some information to drive in sufficient comfort. This operation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's look at how to change this bulb, point by point.change-bulb-clock-Citroen-Saxo

How to change the display bulb of the Citroen Saxo

Depending on the release dates, the method may vary a bit. It is likely that some covers or screws are not identical. This is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of the Citroen Saxo. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered particular concerns.