When the clock stops working, it can be unpleasant. So you have to replace the display bulb of this Citroen Spacetourer. Although the dashboard remains functional, it lacks certain indications to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of rigor. We advise you to take pictures at different stages to remind yourself of the reverse process, especially concerning the connectors. To perform this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb, step by step.
How to change the display bulb of the Citroen Spacetourer
Depending on the years of circulation, the method may vary a little. It is possible that several covers or screws differ. This is the logic to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Citroen Spacetourer. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also naturally.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered particular problems.