When the clock stops working, it can get annoying. So you have to change the display bulb of this Citroen Survolt. Even if the dashboard remains functional, it lacks several indications in order to drive comfortably. This action is not complex to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Citroen-Survolt

How to change the light bulb on the Citroen Survolt display

Depending on the production dates, the methodology may vary slightly. It remains likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors that connect to the clock bulb of your Citroen Survolt. You will be able to dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular malfunctions.