When the clock stops working, it can get unpleasant. So you have to replace the display bulb of the Citroen Tubik. Even if the dashboard remains operational, it lacks several indications to circulate comfortably. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To accomplish this task, count roughly a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Citroen-Tubik

How to change the light bulb on the Citroen Tubik display

Depending on the release dates, the procedure may vary slightly. It remains likely that several covers or screws are not identical. So here is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Citroen Tubik. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension as well, of course.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.