When the clock runs out of light, it can be annoying. It will therefore be necessary to replace the display bulb of the Citroen Visa. Even if the dashboard remains operational, we lack some information to drive comfortably. This operation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this manipulation, plan about a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Citroen-Visa

How to change the light bulb on the Citroen Visa display

Depending on the release dates, the procedure may vary slightly. It is likely that some covers or screws differ. Here is the procedure to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Citroen Visa. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension as well, of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered specific problems.