When the clock runs out of light, it can be annoying. We will therefore have to replace the display bulb of this Hyundai I-blue. Although the dashboard remains functional, certain information is missing to circulate comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To complete this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Hyundai-I-blue

How to change the bulb of the Hyundai I-blue display

Depending on the production dates, the method may vary a little. It is conceivable that some covers or screws are not identical. This is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this Hyundai I-blue. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered specific concerns.