When the clock runs out of light, it can be annoying. So you have to change the display bulb of this Hyundai I-mode. Although the dashboard remains functional, we lack several information to drive comfortably. This manipulation is not complex to carry out, but requires a minimum of meticulousness. It is also advisable to take photos at different stages to remember the reverse manipulation, especially regarding the connectors. To perform this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Hyundai-I-mode

How to change the bulb of the Hyundai I-mode display

Depending on the release dates, the methodology may vary a little. Several covers or screws may not be identical. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to take off some screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this Hyundai I-mode. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered specific concerns.