When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of the hyundai i10. Even if the dashboard remains operational, we are missing some indications in order to circulate in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages in order to remind you of the opposite approach, particularly concerning connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb, step by step.change-bulb-clock-hyundai-i10

How to change the bulb on the display of the hyundai i10

Depending on the release years, the method may vary slightly. It is conceivable that several covers or screws are not identical. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of this hyundai i10. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular concerns.