When the clock stops working, it can get unpleasant. So you have to change the display bulb of the hyundai i20. Even if the dashboard remains functional, we are missing certain information in order to drive in sufficient comfort. This action is not complex to carry out, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remind you of the reverse process, especially concerning the connectors. To complete this task, count approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to change this bulb, point by point.change-bulb-clock-hyundai-i20

How to change the bulb on the display of the hyundai i20

Depending on the release dates, the methodology may vary a bit. It is still possible that several covers or screws differ. We therefore suggest the general procedure to follow.

  • Start with remove the covers of the front panel which hinder access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the hyundai i20 clock bulb. You will be able to remove all of the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension too of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered any particular concerns.