When the clock stops working, it can be annoying. So you have to change the display bulb of this Hyundai I30 (3rd Generation) N. Although the dashboard remains operational, we are missing some information to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To carry out this operation, count approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the display bulb of the Hyundai I30 (3rd Generation) N
Depending on the years of production, the methodology may vary a little. Several covers or screws may differ. Here is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. Therefore, keep them carefully aside.
- Once the front is completely removed, you need disconnect connectors connected to the clock bulb of the Hyundai I30 (3rd Generation) N. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- You can normally access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Please do not hesitate to leave us a comment if you have encountered specific concerns.