When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of the hyundai i30. Even if the dashboard remains operational, we lack several information to drive in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remember the reverse process, especially for connectors. To accomplish this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the display of the hyundai i30
Depending on the release dates, the method may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors connected to the clock bulb of this hyundai i30. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific problems.