When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of the hyundai i40. Even if the dashboard remains functional, we are missing some information in order to drive comfortably. This action is not complex to perform, but requires a minimum of rigor. It is also advisable to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To accomplish this task, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, point by point.change-bulb-clock-hyundai-i40

How to change the bulb on the display of the hyundai i40

Depending on the release dates, the procedure may vary slightly. It remains likely that several covers or screws are not identical. So that's the general approach.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this hyundai i40. You can therefore dismantle all of the block's connectors, as long as you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific malfunctions.