When the clock stops working, it can be annoying. So you have to change the display bulb of this Hyundai Ioniq. Although the dashboard remains operational, we lack some information to circulate in good conditions. This operation is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remind you of the opposite approach, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Hyundai Ioniq display
Depending on the release dates, the methodology may vary a little. It is likely that some covers or screws differ. This is therefore the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Hyundai Ioniq. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension as well, of course.
- Put in the new bulb making sure it sits well at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered specific problems.