When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of this Hyundai Ix-onic. Although the dashboard is still operational, there are some indications missing to drive in good conditions. This operation is not difficult to carry out, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To perform this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Hyundai-Ix-onic

How to change the bulb of the Hyundai Ix-onic display

Depending on the production dates, the method may vary a little. It is possible that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of this Hyundai Ix-onic. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also naturally.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular malfunctions.