When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of this Hyundai Ix35. Even if the dashboard remains functional, it lacks some information to drive comfortably. This operation is not complex to perform, but requires a minimum of thoroughness. It is indeed advisable to take pictures at different stages to remind you of the reverse manipulation, especially concerning the connectors. To carry out this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.
How to change the display bulb of the Hyundai Ix35
Depending on the years of production, the methodology may vary a bit. It remains conceivable that some covers or screws are not identical. Here is therefore the general procedure to follow.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, you will need disconnect connectors connected to the clock bulb of the Hyundai Ix35. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also naturally.
- Put in the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered particular concerns.