When the clock stops lighting up, it can be annoying. It will therefore have to change the display bulb of this Hyundai Ix55. Even if the dashboard remains operational, we lack several indications in order to drive in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remember the reverse process, especially for the connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb step by step.
How to change the display bulb of the Hyundai Ix55
Depending on the years of circulation, the method may vary a little. Some covers or screws may not be the same. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
- Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of your Hyundai Ix55. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific concerns.