When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of the hyundai lantra. Even if the dashboard remains functional, we are missing certain indications in order to drive comfortably. This operation is not complex to execute, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb, point by point.
How to change the bulb on the display of the hyundai lantra
Depending on the production dates, the method may vary slightly. It is likely that some covers or screws are not identical. Here is therefore the logic to be followed in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
- Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of this hyundai lantra. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also of course.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered particular concerns.