When the clock stops working, it can be unpleasant. So you have to change the display bulb of the hyundai matrix. Although the dashboard remains operational, several indications are missing in order to circulate in good conditions. This operation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, count approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.change-bulb-clock-hyundai-matrix

How to change the bulb of the hyundai matrix display

Depending on the release dates, the methodology may vary a little. It is conceivable that some covers or screws differ. We therefore propose the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, you will need disconnect connectors which connect to the clock bulb of the hyundai matrix. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.