When the clock runs out of light, it can be unpleasant. So we will have to change the display bulb of this Hyundai Neos 2. Even if the dashboard remains operational, we lack some indications to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, step by step.
How to change the display bulb of the Hyundai Neos 2
Depending on the release dates, the procedure may vary a little. It is conceivable that some covers or screws differ. We therefore offer you the general procedure to follow.
- Start with remove the covers from the front that impede access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of your Hyundai Neos 2. You can therefore remove all of the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific malfunctions.