When the clock runs out of light, it can get annoying. It will therefore be necessary to replace the display bulb of the Hyundai Neos. Although the dashboard remains functional, certain information is missing in order to circulate in good conditions. This action is not difficult to execute, but requires a minimum of rigor. It is also advisable to take photos at different stages in order to remind you of the opposite approach, especially regarding connectors. To perform this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, point by point.change-bulb-clock-Hyundai-Neos

How to change the bulb on the Hyundai Neos display

Depending on the years of production, the method may vary slightly. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, you will need disconnect connectors connected to the clock bulb of your Hyundai Neos. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension as well obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered specific concerns.