When the clock runs out of light, it can get unpleasant. So we will have to change the display bulb of the Hyundai Pony. Even if the dashboard is still functional, we lack certain information to drive comfortably. This action is not difficult to carry out, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.change-bulb-clock-Hyundai-Pony

How to change the bulb on the Hyundai Pony display

Depending on the release dates, the procedure may vary slightly. It remains possible that several covers or screws are not identical. Here is therefore the procedure to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Hyundai Pony. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also naturally.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular concerns.