When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of the Hyundai Portico. Even if the dashboard remains functional, some information is missing in order to circulate in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the Hyundai Portico display
Depending on the release dates, the method may vary a little. It remains likely that several covers or screws are not identical. So here is the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of your Hyundai Portico. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension as well obviously.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered particular concerns.