When the clock stops working, it can get annoying. So we will have to change the display bulb of this hyundai santa fe. Although the dashboard is still functional, it lacks several indications in order to drive in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse manipulation, especially for the connectors. To carry out this manipulation, allow approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.
How to change the display bulb of the hyundai santa fe
Depending on the production dates, the procedure may vary slightly. It is conceivable that a few covers or screws differ. Here is the general process to follow.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors that connect to the clock bulb of the hyundai santa fe. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also naturally.
- Place the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered particular problems.