When the clock runs out of light, it can get annoying. So you have to replace the display bulb of this Hyundai Satellite. Although the dashboard remains functional, we are missing certain indications in order to circulate comfortably. This action is not difficult to carry out, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.
How to change the bulb on the Hyundai Satellite display
Depending on the years of circulation, the methodology may vary a little. It is conceivable that some covers or screws are not identical. We therefore suggest the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
- Once the facade is completely removed, you need disconnect connectors that connect to the clock bulb of your Hyundai Satellite. You can therefore dismantle all of the block's connectors, as long as you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered particular problems.