When the clock stops working, it can be annoying. So you have to change the display bulb of this Hyundai Scoupe. Even if the dashboard is still operational, we are missing some indications to drive comfortably. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at different stages to remember the reverse manipulation, especially regarding the connectors. To execute this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.change-bulb-clock-Hyundai-Scoupe

How to change the bulb on the Hyundai Scoupe display

Depending on the release years, the method may vary slightly. It remains conceivable that some covers or screws are not identical. Here is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the front is completely removed, you need disconnect connectors connected to the clock bulb of your Hyundai Scoupe. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension as well, of course.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered specific problems.