When the clock runs out of light, it can get unpleasant. We will therefore have to replace the display bulb of the Hyundai Sonata. Even if the dashboard remains operational, there are some indications missing to drive comfortably. This action is not complex to execute, but requires a minimum of rigor. It is indeed advisable to take photos at different stages to remember the reverse manipulation, especially for the connectors. To perform this task, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-hyundai-sonata

How to change the bulb on the display of the Hyundai Sonata

Depending on the release year, the procedure may vary slightly. It remains likely that some covers or screws differ. So that's the general approach to follow.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of the hyundai sonata. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.