When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of the Hyundai Terracan. Although the dashboard is still operational, we lack several information to circulate comfortably. This action is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remind you of the opposite approach, especially for connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, point by point.
How to change the bulb on the hyundai terracan display
Depending on the release dates, the procedure may vary a little. Some covers or screws may not be the same. This is the general approach to follow.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors that connect to the clock bulb of your hyundai terracan. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension too of course.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific malfunctions.