When the clock stops working, it can be unpleasant. It will therefore be necessary to replace the display bulb of the hyundai ride. Although the dashboard is still operational, certain indications are missing to drive in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remember the reverse manipulation, especially regarding connectors. To complete this task, count about a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb, point by point.change-bulb-clock-hyundai-ride

How to change the bulb of the display of the hyundai route

Depending on the release dates, the procedure may vary a little. It is likely that several covers or screws are not identical. We therefore suggest the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of this hyundai ride. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular problems.