When the clock stops working, it can be unpleasant. It will therefore have to change the display bulb from the hyundai tucson. Although the dashboard remains functional, we lack some indications to drive comfortably. This action is not complex to execute, but requires a minimum of rigor. We advise you to take photos at different stages to remind you of the reverse approach, especially for connectors. To do this, count roughly a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-hyundai-tucson

How to change the bulb on the hyundai tucson display

Depending on the year of release, the methodology may vary a little. It is likely that some covers or screws differ. So here is the logic to follow in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of this hyundai tucson. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension as well, of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific problems.