When the clock stops lighting up, it can get unpleasant. We will therefore have to replace the display bulb of this Hyundai Veloster. Although the dashboard is still functional, we are missing some indications to circulate in good conditions. This operation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To perform this task, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Hyundai-Veloster

How to change the bulb on the Hyundai Veloster display

Depending on the production dates, the method may vary slightly. It remains likely that some covers or screws are not identical. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Hyundai Veloster. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also obviously.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular malfunctions.